Northeast Medical Consulting, Inc | Architectural Headwalls
















Medical Gas Services



Medical Piped Gas Certification

  • Independent 3rd party verification performed in accordance with applicable NFPA 99, ASSE 6030, NITC, CGA, JCAHO, and UPC standards
  • 6 NITC Certified Medical Gas Verifiers
  • Complete inventory of all equipment
  • On-site test report and consultation on same day of service
  • Recommendations for repair and preventative maintenance


Medical Gas Systems Evaluation
(All testing is referenced to NFPA 99, 2002 code)

  • Oxygen, Medical Air, Nitrous Oxide, Nitrogen, Carbon Dioxide, Vacuum, and WAGD
  • Evaluation of bulk supply sources
  • Testing of master and area alarms, zone valves, patient terminals
  • Purity testing for gaseous and particulate contamination
  • On-site test report with consultation
  • Recommendations and service for repair and preventative maintenance


Scope of Work

  1. Source Equipment Evaluation of the bulk supply, pumps, and compressors
    • Bulk supply inspections
    • Manifolds
    • Compressors and Pump inspections
    • Pressure relief valve inspections
    • Confirmation of proper electrical service
    • Review of installation and maintenance
    • Evaluation of compliance with applicable codes
    • Medical Air intake and Vacuum Exhaust inspection
    • Dew Point and Carbon Monoxide Monitor Calibration available at an extra cost

  2. Evaluation of alarms, valves, gauges, and piping
    • Testing of the master and area alarms
    • Primary and area gauge inspection
    • Main valve and zone valve inspection

  3. Testing of every patient terminal
    • Pressure and flow
    • Leakage
    • Labeling
    • Proper operation
    • General Condition
    • Bed to terminal ratio

  4. Contaminant Testing of medical gases
    • Carbon Monoxide
    • Carbon Dioxide
    • Hydrocarbons
    • Nitrous Oxide
    • Odor
    • Particulate Matter
    • Dew Point
    • Moisture

  5. Immediate report and typed permanent documentation
    • Same day consultation with hospital contact
    • Identification of major problems pointed out immediately to contact
    • Recommendations as necessary
    • Inspection performance report printed out and/or emailed in Microsoft Excel


Medical Gas Products Service (Full Service/Repair)

  • Repair Service and Planned Maintenance Options
  • On-site repairs for vacuum pumps, medical air compressors and manifolds
  • On-site rebuilds of vacuum pumps and medical air compressors
  • Planned maintenance options that meet NFPA, JCAHO recommendations
  • Repair, rebuild or replacement of Medical Gas Manifolds, Air Compressors, Vacuum Pumps and Alarm Panels, as well as Ceiling Columns, Outlets and Med Gas Accessories
  • Factory trained experienced field reps
  • Field service personnel are not limited to one manufacturer's products


Medical Piped Gas Decontaminations

  • Decontamination of all risers, laterals, branches, and outlets
  • High flow purges for particulate
  • Washes for scale, corrosion, flux, fouling, bacteria, and odor
  • Documentation of evaluation, reports of decontamination, and complete utility inventory
  • Decontaminations performed in accordance with applicable standards


Download a copy of the Medical Gas and Environmental Monitoring Bid Sheet





Top

For Questions or Comments please email us at:
Northeast Medical Consulting, Inc.

All Rights Reserved - Disclaimer
Webpage and Logo Designed by: Iteam4