Northeast Medical Consulting, Inc | Architectural Headwalls

Medical Environmental Monitoring

Laboratory Formaldehyde Monitoring

Monitoring of breathing zones for employee exposure
Testing available for Xylene, Alcohol, Toluene, and others
Testing areas include: Pathology Grossing, Histology, Morgue, Microbiology, Cytology, OR, OB, and Dialysis
Results include: 8 HR TWA, 15 MIN STEL
Ventilation System Evaluation of inlet and exhaust vents to Calculate
Total Air Exchange Rate

Passive Dosimeter Badge Order Form

Ethylene Oxide Monitoring

Environmental monitoring of breathing zones for employee exposure
Monitoring during running of sterilizers and aerators
Results include: 8 HR TWA, 15 MIN STEL
Leak detection of Sterilizer, Aerator, and Supply Lines and Tanks
Ventilation System Evaluation of inlet and exhaust vents to Calculate
Total Air Exchange Rate

Passive Dosimeter Badge Order Form

Waste Anesthetic Gas Monitoring

Monitoring for employee exposure to N2O and Halogenated agents in the OR's, Delivery, Cysto, Endo, and Recovery Rooms
Leak detection is performed on the anesthesia machines, all connections of supply hoses, and N2O supply manifold
Testing includes checking vacuum inlets for pressure and flow
Ventilation System Evaluation of inlet and exhaust vents to Calculate
Total Air Exchange Rate

Passive Dosimeter Badge Order Form

Glutaraldehyde Monitoring

Monitoring breathing zones for employee exposure during peak usage with digital electrochemical sensor for accurate instantaneous results (OSHA Approved Method)
Ceiling Limit is 0.2 PPM (Set by ACGIH)
To Calculate Total Air Exchange
Testing Areas include: OR, CS Endo, Cysto, RT, ER, and Anesthesia
Ventilation System Evaluation of inlet and exhaust vents to Calculate
Total Air Exchange Rate

Passive Dosimeter Badge Order Form

Anesthesia Vaporizer Accuracy

Accuracy verification for calibration of vaporizers within manufacturer's standard of plus or minus 15% tolerance range
Documentation of Brand, Model, Serial Number, Machine Serial Number, and Halogenated agents used

Results are on-site

Isolation Room Ventilation Evaluation

Evaluation / Inspection of intake and exhaust venting performance
Calculate Total Air Exchange Rate
Negative / Positive Pressure Check for air movement
Evaluate exhaust termination point

Evaluate employee respiratory protection plan

Indoor Air Quality Monitoring

Infrared gaseous contaminant testing
Volatile and Semi-Volatile Organic compound testing
Microbiological contaminant testing
Airborne particulate testing
Comprehensive Ventilation Evaluation

Passive Dosimeter Badge Order Form

Features of NMC's Environmental Monitoring Services

Evaluations and Recommendations for Employee Work Practices and Emergency Action Plans for all services
Testing complies with applicable regulations set by JCAHO, OSHA, DHHS, NIOSH, ACGIH, NFPA, CGA, and ANSI(*)
State of the Art technological testing equipment and testing procedures
Eight (8) Service technicians with 90+ years of combined experience
OSHA method trained staff
Guaranteed customer satisfaction for services performed
One million dollar professional liability insurance

Representation if cited by OSHA

Download a copy of the Medical Gas and Environmental Monitoring Bid Sheet

(*)NMC's testing complies strictly with all regulatory requirements from NFPA, JCAHO, NIOSH, CGA, CAP, OSHA, AAMI, and ASHE. We utilize the most advanced equipment and procedures available.

Top